Video: trailer covers and roll-over tarps - the best options - farmers weekly

Some form of cover for agricultural trailers is becoming commonplace to secure loads or protect them from the elements and contamination. They range from cut-to-size covers with elastic

securing straps and manually-operated roll-over sheets to powered designs that provide rapid, delay-free covering of loads. Sourcing options include the trailer manufacturers themselves or

specialist suppliers which offer standard kits or a made-to-measure service that can also include installation. Read about the options below and watch the videos of how different covers

work. See also: Upgrading trailer brakes SHEET COVERS Side-to-side roll-over sheets enable members of the Red Tractor Assurance scheme to comply with the requirement for trailers making

off-farm deliveries to protect the crop from potential contamination. This mirrors the Trade Assurance Scheme for Combinable Crops (TASCC) rules for commercial hauliers and forms part of the

Red Tractor OT (off-farm transport) regulations, which have recently been revised to require the membership number and individual trailer identity number to be displayed on the rear and

sides of the trailer. The crop cover requirement includes commodities such as grain being delivered to a central store or to a merchant or feed mill, says Vicky Smith of Red Tractor

Assurance, but sugar beet being delivered to a processing factory is excluded. In terms of hardware on the trailer, arches front and back – and also in the middle on longer trailers – should

ensure the heavy plastic covers shed rain water. THE MAIN SHEET COVER OPTIONS ARE: Covertec supplies kits for self-fitting or will measure, make and install a manually-operated roll-over

sheet COVERTEC STRUCTURES at Lutterworth can supply a kit for £1,200 based on the buyers’ measurements, but the full service is not much more at £1,575 to have the trailer measured and the

cover made and fitted. In common with a number of designs, once the trailer is loaded, the sheet is deployed either by pulling it across using a rope previously attached to a securing strap

before the cover is opened or by activating an electric or hydraulic motor. A mesh sheet helps contain light materials such as poultry manure and compost on this Richard Western SRT 20

trailer equipped with an AgriCover system RICHARD WESTERN offers a fitted bulker sheet for £591, a manually-operated side-to-side roll-over sheet for £2,012 and a powered version for £3,695.

An arched front window adds £800 to a Richard Western SF trailer but is standard on RC and SWT models. With flip-over covers, the mesh or PVC sheet is pulled off the roll by powerful steel

springs and reeled back in again by an electric or hydraulic motor Like Richard Western, Herefordshire-based AW ENGINEERING offers all three options. Side-to-side roll-over covers typically

sell for £1,700 as a manual system or £2,500 with hydraulic power. There’s also a version that mounts on and rises with the tailgate. A hydraulically-operated end-to-end net cover costs

around £2,000. A Richard Western SF14HS Edition silage trailer with mesh cover Harry West and Marston trailers manufacturer MALLINSON FABRICATIONS has roll-over sheet options that are fixed

along one side and secured by ratchet straps on the other. A long winding handle stored on the side of the body slots into the central pole so that the sheet can be wound in and out from

ground level. Harry West charges £1,400-£1,600 for this installation on trailers of different sizes. Frame and spring unit used for the AgriCover by manufacturer Transcover Unless the

hydraulic version is fitted, STEWART TRAILERS provides a length of nylon rope stored on hooks alongside the central ratchet strap to pull the sheet closed after it has been opened using a

winding handle. To avoid the front and rear side straps falling into the body, they are held in stiff covers to the trailer sides and hooked on to the sheet once it is in place. Prices are

£1,300 for the manual version and £2,500-£3,500 for the hydraulic alternative. This potato box cover on the headboard of a Bailey flatbed is pulled out using an extending dog lead and wound

again using the manual ratchet mechanism An extending dog lead stored in the same position is the BAILEY TRAILERS solution for its £1,400 EasySheet, which can have hydraulic drive to the

winding pole. The same device is used to pull out the headboard-mounted sheet available on the Lincolnshire-based company’s potato box flatbed trailer. It keeps potatoes dry when harvesting

in wet weather and free of road salt and other contamination thrown up by the tractor wheels in wet or especially dusty conditions. A ratchet winding mechanism pulls the sheet tight once it

has been secured to the rear end of the trailer and to wind in the sheet ready for offloading. Separate ratchets are used to wind the side-to-side cover in and out over 450mm arches on

Larrington’s Harvester trailers Ratchet winding mechanisms are also used for the manual roll-over sheet available on LARRINGTON TRAILERS, especially when fitted with optional 450mm arches to

give adequate clearance over heaped potatoes and other loads. Larrington Harvester trailers are available with 150mm arches for low buildings and the more common 300mm version, which is

said to give good water run-off. The most pronounced arch configuration costs no more but the £1,675 ratchet mechanism helps pull the sheet over them more easily. There are two ratchets at

shoulder height on either side at the front of the trailer connected by a webbing strap that rotates the main sheet tube along the arched tracks. Shafts transfer drive to the far end of the

poles at the same time and the ratchet holds the sheet taught once fully deployed. A roll-over sheet system with hydraulic power operated at the trailer or from the tractor cab is also

available but costs significantly more at £5,200. Transcover’s STS Agri roll-over sheet comes with arches and a rack and pinion mechanism to pull the sheet back and forth TRANSCOVER’S STS

AGRI SYSTEM, costing £3,500 installed and complete with adjustable galvanised steel arches, uses a hydraulic rack-and-pinion mechanism to power the sheet across. Joskin Telecover fits

push-off and tipping trailers with monocoque bodies and does not need to be rolled up when the load is discharged JOSKIN’S TELECOVER hydraulically-operated roll-over sheet is available for

the manufacturer’s monocoque tipping and push-off trailers. It places a heavy-duty waterproof plastic sheet over the trailer body and the crop using a hydraulic motor to roll and unroll it,

with an articulated arm at each end guiding the roller over and a short distance down the side of the trailer body. Together with elastic tensioning chords at each end of the sheet, this

ensures the cover keeps out rain and pollutants, says Joskin, while keeping in any light crop or associated debris. On a tipping trailer, the cover can remain closed while the load is

discharged because the sheet is secured on a separate frame with one end mounted on the hydraulic tailgate. Yorkshire-based HARSH UK supplies Roll N Go side-to-side roll-over sheeting

assemblies with manual, electric or hydraulic drive, but its Slide N Cover product is a front-to-back cable system running down the length of the trailer body. Manual, electric and hydraulic

drive options are available again, with the sheet spanning the body at the same height as the sides – so there is no scope for covering a heaped load – and retracting to the front of the

body. MESH COVERS So-called flip covers are the most popular means of deploying a relatively light plastic mesh sheet to retain loose material from loads of poultry manure, compost, maize

silage and the like. Typically, they comprise two galvanised steel arms either side of the trailer body attached to compact leaf-spring cassettes that deploy the sheet once the trailer is

loaded from a roll positioned at the front of the body. The mesh sheet is pulled back using a winding handle at ground level or – more commonly – an electric or hydraulic motor. THE MAIN

MESH COVER OPTIONS ARE: HARSH UK says its Flip N Go design suits trailers up to 8.5m long carrying bulk, heaped loads that require containing for transportation; power driven versions

retract the sheet fastest and are operated from the tractor cab. A Stewart Construction Pro trailer equipped with a Transcover mesh load covering system In Kent, TRANSCOVER produces a

similar front-to-rear mechanism for tippers or push-off trailers with zinc and powder-coated finishes for the arms forming the frame and electric direct drive or a hydraulic motor and worm

gear unit reeling the sheet back in. Material options include supermesh, described as a lightweight but stronger alternative to standard mesh, and pleated, which is manufactured with a fold

running along its length that opens to completely cover a load when deployed. Side flaps are available and so is a PVC sheet in place of mesh to provide a waterproof cover. A Stronga BL600

trailer with Roll Sheet cover and hydraulic tailgate. The Agri-Flip 9000 with electric motor drive will pull back the cover in less than 10 seconds, says SHUR-CO, also based in Kent, which

also supplies roll-over kits from £650 manual to £3,000 for an auto electric version, and end-to-end systems – the latter with sliding arches to clear heaped loads – as well as side-folding

mesh lids. Another folding screen option is produced as the Duo-Cover by JOSKIN for its Silo-Space triple axle silage and multi-purpose trailers and Drakkar push designs, priced at £7,920.

While the trailer is being loaded, the two full-length screens are positioned flat against the outer sides before being rotated through 270deg by hydraulic motors to lay on top of the load

to prevent light forage and other crop material being blown out. The Roll Sheet available on Stronga trailers is opened and closed front a bulkhead platform using a winding handle on the

centre pole The front-to-back sheeting system available from BAILEY TRAILERS is priced £2,850. Richard Western charges a similar amount at £2,745 and Larrington Trailers lists its version at

£2,625 for the system sourced from Transcover, which Stewart Trailers also uses. HOW THEY WORK AW TRAILERS – MANUAL SIDE SHEET AW TRAILERS – ELECTRIC FRONT TO BACK MESH AW TRAILERS –

ELECTRIC OR HYDRAULIC SIDE-TO-SIDE _Videos courtesy of AW Trailers_